With this method you can learn how to remove google grand prime account definitely. Although in previous versions it was possible to do it with a hard reset, in this case it will be necessary to install a firmware, but outdated to work on the model you have. So understanding this, go to action to find out …
How to solve how to remove google grand prime account
With this method you solve how to remove google grand prime accountAs long as you follow the following steps one by one without skipping any and without complicating yourself and you can remove that account that you no longer want linked to your mobile phone.
Step 1: Go to the Sammobile website, create an account and log in. Since you must download the firmware corresponding to the model of your mobile phone and for this go to Firmware.
Step 2: In fact now you must look for the model of your mobile device.
Step 3: Now you will have to look for the firmware according to the operator and the country.
Step 4: Press the Ctrl + F keys on your keyboard and then search for the SM-G531H model, this digits: U0AOJ2.
If your model is the G531BT or G531F, the code is this: U1AOJ2 or U0AOJ1. When locating the corresponding click on the firmware that has that termination.
Step 5: Click on Regular Download and after 10 seconds on Download and you just have to wait for the firmware download to finish.
Step 6: You must also download the Odin that you will find below on the same page.
Install firmware
- You have already downloaded the two previous files, so now you must continue with the installation of the drivers corresponding to Samsung, which as they are universal, work for everyone.
- Unzip both files and run Odin.
- In Odin, go to PDA and a window will open where you will look for the firmware you unzipped.
- Once the firmware has been loaded onto the PDA, connect the mobile phone to the computer by putting the device in Download mode, which you will do by pressing the three buttons “power, home and vol” at the same time.
When you have put it in download mode, you will connect it to the computer and you will see that the box next to Odin is blue and you will press Start and then the firmware will begin to install.
- At the end of the process the phone will restart automatically. Then you will close Odin and wait until the phone starts and you will configure it, but you have not yet deleted the account, you will have to follow these steps:
Step 7: Discharge Bypass. apk, is an application that you will copy to the root of the USB memory.
Step 8: Connect USB to OTG cable. You do it by connecting it to the mobile phone on. When the cable is detected, a window with the files on the USB memory opens automatically.
Step 9: Install the Bypass.asp application that you copied. Click on the application and you will see a window that says installation blocked.
Step 10: Click Settings and check Unknown sources and then OK.
Step 11: To install you will see that the installation window opens and when it has been installed you will open it.
Step 12: You will see that Phone Settings opens and you will go to Backup and reset.
Step 13: Click on Factory data reset, then on resetting the device and finally on Delete everything.
At this time, data and the Google account will be deleted. Wait until the process finishes and the system starts.
Step 14: When the system starts, do the configuration of the mobile phone options and you will do it to your liking without requesting the account verification and you will have already removed the Google account.